Technical description: Upper head tuned (pedal control) and played with hard sticks; lower head played as bass drum by pedal beater.
Cylindrical shell mounted by four legs on tensioning mechanism with pedal, made from aluminium castings. Depressing pedal causes upper head to be tensioned
by raising an internal hoop. A damper plunger is fitted to the top head on an external chrome finish strap which is attached to two adjacent legs. One of
the other two legs support attachments for choke cymbals and wood block. The fourth leg supports a sizzle cymbal and a cowbell. An adjustable aluminium
casting forms the side drum support. A pedal works a vertical-action beater which plays on the lower head of the drum. Two internal dampers are fitted to
the lower (bass drum) head. 20-inch heads.
새긴 글(銘文)
Inscribed on each of two maker's badges around air-holes "CARLTON / MADE IN ENGLAND / KING". Inscribed on chrome-plated bar on
shell "PATENT Nos 610151-592979-590803". Inscribed on upper counter-hoop "RMB / 21". Written in green ink on tie-on paper label (Blades?) "Combo drum
kit / To assemble (and dismantle) / 1: Keep the 4 rods on drum / fixed permanently. / 2: Fit lower rods into the / respective upper rods / Lower the
drum into base. / Release head pressure / and engage connecting / unit into drum and base / (left & right hand thread / engages simultaneously). /
Place initial pressure on head." and "Level up by adjusting rods". Inscribed on bass-drum pedal "CARLTON / FOUR-FOUR".
